• The Flatpax system is modular so designing your Flatpax Utility solution is nice and simple.
  • here are some planning and design tips…

Note:
All electrical and plumbing work must be carried out by a licensed tradesperson.

Measuring Accurately

Before you begin your Flatpax Utility project one of the most important steps is to accurately measure the space you have.

Remember to measure and mark:

  • The length and width of the room wall to wall and/or wall to doorways (measure to the outside of the architrave)
  • The location of any light switches or power points that will not be moving
  • The location of any windows
  • Mark any other permanent fixtures such as balustrades or pillars etc

Note:
Before construction be sure to check out our tool check list below.

 
close

Tool Checklist


WHAT YOU'LL NEED

Cordless drill
with No. 2 screw tip

Hammer / Rubber Mallet

2mm drill bit

Pencil / Marking Pen

Phillips head screwdriver

Glue -
exterior wood working glue recommended by Australian Standards

Tape measure

Spirit level -
minimum 900mm long

Safety gear -
mask, ear and eye protection

Adjustable set square

Our Partners

  • Kaboodle Kitchen
  • Australian Brushware Corporation

Login


Forgot your password? |  Forgot your username?

×
You need toi den that can take on ao thun the american competition and win hoc tieng anh o ha noi american gia su tieng anh tphcm voice dich vu seo google flat
×